Project & Case
Contact Us
- Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
- Zip Code:
- Email:
- Phone:
- Fax:
FAQ
-
2023-05-24How to measure the local bow and the edge kink of tempered glass?
How to measure the local bow and the edge kink of tempered glass? Measure the gap between the glass and the ruler with a feeler gauge. The maximum value is the local bow of the glass.
-
2023-04-30What should I pay attention to when tempering different types of glass in…
When tempering glass with holes and slots, the heating time should be increased by 2.5% to 5% compared to glass of the same size without holes and slots
-
2023-03-27What are the common problems with the lifting section of the heating fu…
The lifting mechanism of the heating furnace in glass tempering furnace is mainly composed of a gear motor, driving shaft, gears, lead screw nut mechanism, and guide pillars.
-
2023-02-28How to eliminate the risk of spontaneous breakage of tempered glass due …
In order to eliminate the adverse effects of nickel sulfide in tempered glass, a heat soaking furnace should be used to homogenize the tempered glass after the tempering is completed in the glass tempering furnace.
-
2023-01-29How to clean the ceramic rollers of the glass tempering furnace?
Shut off the glass tempering furnace and allow it to naturally cool down to the ambient temperature. Raise the upper part of the furnace body and insert safety pins in the columns at the corners of the furnace body. With personnel safety ensured…
-
2022-12-19How to maintain the main drive mechanism of the glass tempering furna…
The main drive mechanism is the core component of the glass tempering furnace. The smooth operation of the main drive mechanism is the fundamental basis for high-quality tempered glass production.1. The level of the lubricating oil in the main drive
-
2022-11-23What effect does the flatness of tempered glass have on finished glass?
Poor flatness of tempered glass can leave the glass surface bumpy and uneven, causing optical distortion of the finished glass, like windows, doors, curtain walls, etc.
-
2022-09-23What should you do if the radius of curved tempered glass is smaller than…
When processing curved tempered glass, we will use a standard template to adjust the shape of the lower bending chiller to meet the curvature of the standard template.