Project & Case
Contact Us
- Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
- Zip Code:
- Email:
- Phone:
- Fax:
FAQ
-
2022-02-15What to do if the corners of a thick glass plate are chipped during the gla…
If the glass is unevenly heated in the glass tempering furnace, the glass warps and form a spherical surface. It may result in its edges and corners being chipped when colliding with the ceramic roller conveyor during oscillating movement.
-
2022-01-19When making flat tempered glass, what should you do if the flatness of g…
Differences in the wind pressure at different positions of the chiller will cause the tempered glass in the corresponding areas to have different flatness . Take the following measures to tackle the issue
-
2021-12-13How to adjust the glass tempering machine when tempering bent tempere…
ways to adjust the glass tempering machine when tempering bent tempered glass with different specifications
-
2021-11-12What issues you may encounter after the glass enters the glass tempering …
As the glass temperature is relatively low when it just entered the glass tempering furnace, the temperature of its lower surface will be affected by both the ceramic rollers with which it gets in touch and the bottom heating elements……
-
2021-10-12What should you do if the glass sheet is stuck to the ceramic rollers duri…
During glass tempering process, in cases the door of the glass tempering furnace is not opened in time and the heating time is too long, or the primary conveyor of the glass tempering machine stops, or other malfunctions occur……
-
2021-09-14What are the production modes of LandGlass B-type bending glass temper…
LandGlass B-type bending glass tempering furnace production modes are as follows: 1. Single-station production mode, 2. Multi-station production mode, 3. Continuous production mode.
-
2021-08-16What are the requirements for cleaning brushes used on Low-E glass duri…
During the glass tempering process, because of the special properties of the glass coating material, the coated surface of the Low-E glass has higher requirements on the cleaning brushes in the washing machine unit.
-
2021-07-13What are the requirements for the placement of glass sheets on the loadin…
The glass sheets placed on the glass tempering machine loading table should be uniform and reasonably spaced, so as to ensure an even distribution of temperature in the furnace chamber and on the ceramic rollers in the chamber.