Home> Service> FAQ
Service
/Service Declaration
/Service Team
/FAQ

Project & Case

Project & Case

Contact Us

contact us
  • Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
  • Zip Code:
  • Email:
  • Phone:
  • Fax:

FAQ

Conversion Procedure between Flat & Bent Tempering

Source: LandGlass  Attention: 786  Published: 2014-08-17

Regarding LandGlass flat&bent bi-directional glass tempering furnace, following steps should be concerned for the conversion procedure between flat & bent tempering:

1. At the adjusting interface of B bending, click “fault reset” and confirm “brake open” .

2. Click “select zero”.

3. Set 10 for “speed”, and 100 for “height”. 

4. Click “bending start”. Normally the “height display” is 100.

5. Click “auto-level”. The “height display” is 0.