Project & Case
Contact Us
- Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
- Zip Code:
- Email:
- Phone:
- Fax:
Technical Data
-
2023-12-20What to Consider When Tempering Ribbed Glass:
Since ribbed glass is a type of rolled glass and its surface is not as flat as float glass, care must be taken during the tempering process.
-
2023-11-16Key Considerations for Using SO2 Gas in The Glass Tempering Furna…
The role of SO2 gas is to act on the surface of the ceramic roller, forming a protective film layer to ensure the smooth running of the glass on the roller.
-
2023-10-17What changes in shape does the glass undergo after entering the glass temp…
Due to the contact between the glass and the rollers of the glass tempering machine, the lower surface of the glass expands faster than the upper surface after entering the furnace.
-
2023-09-19How is the safety functionality of the glass tempering furnace achieved?
Emergency stop buttons are installed on the main operating station of the glass tempering furnace and on the control boxes of each segment.
-
2023-08-18How is the heating time determined in a glass tempering furnace?
Take radiation glass tempering furnace as an example:Generally, the heating time for clear glass (the time the glass remains in the heating furnace) is set at approximately 40 to 50 seconds for each millimeter of glass thickness.
-
2023-07-19What are the basic requirements for operators of glass tempering furnaces…
A thorough understanding of the working principles and technical parameters of the glass tempering furnace is paramount for operators.
-
2023-06-20Adjusting the Photoelectric Switch on a Glass Tempering Furnace
The photoelectric switch in a glass tempering furnace plays a critical role in the glass tempering process. Proper adjustment of this switch is essential for optimal performance.
-
2023-05-24What to pay attention to when installing and maintaining the furnace door…
The furnace door system consists of a cylinder, a drive shaft, tension springs, pull rods, and a furnace door. When the tempering furnace door system is in operation, the cylinder moves and drives the drive shaft to rotate.