Project & Case
Contact Us
- Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
- Zip Code:
- Email:
- Phone:
- Fax:
Technical Data
-
2022-07-27What are the elements that ensure uniform heating in the glass tempering…
To ensure the even loads in both transversal and longitudinal directions inside the glass tempering furnace, the number of glass sheets placed for each batch must match the heating capacity of the glass tempering machine. The placement of the glass a
-
2022-06-21Why can’t the small shattered glass pieces be left in the glass temperin…
During the glass tempering process, there will be glass broken in the tempering furnace. When that occurs, we must stop the glass tempering machine to cool it down and clean up the shattered glass.
-
2022-05-25What items should be included in the monthly and yearly inspection of gla…
Monthly Inspection should include:The tempering furnace must be cooled down once every month for ceramic rollers and tempering section cleaning…
-
2022-04-30How do you prevent the explosion of thick glass in the glass tempering fu…
When the glass sheet contains nickel sulfide stones, it may cause the thick glass to shatter in the glass tempering furnace. Therefore, the use of high-quality float glass is a basic requirement to prevent the explosion of thick glass.
-
2022-03-17Are the convection technologies used in the glass tempering machine the s…
At present, there are primarily three convection technologies used in the glass tempering machine: pipe convection, chamber convection, and OptiFlow convection.
-
2022-03-15What are the factors that affect the cooling intensity during glass temper…
What are the factors that affect the cooling intensity during glass tempering? Air pressure: we can increase the air pressure by reducing the pressure loss in the air path and reducing the area of the air outlet.
-
2022-02-15When does the benchmark for the bending section of the glass tempering fu…
1. When the curvature of the bent tempered glass produced shows large errors after long-term use of the bending section. 2. After any repair of the arc motor encoder in the bending section of the glass tempering furnace.
-
2022-01-20When making flat tempered glass, what should you do if the flatness of g…
1.During the quenching process, low wind pressure will cause large granular pieces of tempered glass. To tackle the issue, we may increase the wind pressure settings in tempering parameters. We may also appropriately reduce the height of the temper