Project & Case
Contact Us
- Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
- Zip Code:
- Email:
- Phone:
- Fax:
Technical Data
-
2022-01-20When making flat tempered glass, what should you do if the flatness of g…
1.During the quenching process, low wind pressure will cause large granular pieces of tempered glass. To tackle the issue, we may increase the wind pressure settings in tempering parameters. We may also appropriately reduce the height of the temper
-
2021-12-13How to solve the quality issues of bent tempered glass in the glass temp…
When the curvature of the bent glass changes, we should readjust the curvature parameters by extending the heating time or increasing the chamber temperature of the glass tempering furnace. Check if the heating wire and thermocouple work properly.
-
2021-11-18What are the advantages of forced convection glass tempering furnaces, com…
Forced convection glass tempering furnaces use a combination of a high-temperature convection blower and a convection chamber to heat the glass in the furnace through forced convection.
-
2021-11-11What issues you may encounter after the glass enters the glass tempering …
As the glass temperature is relatively low when it just entered the glass tempering furnace, the temperature of its lower surface will be affected by both the ceramic rollers with which it gets in touch and the bottom heating elements…
-
2021-10-12What heating method should be adopted in the glass tempering furnace whe…
When heating the sheet glass larger than 1500mm×1500mm and with a nearly square shape in the glass tempering machine, it is recommended to use a low-temperature and long-time heating method.
-
2021-09-14How to set the heating time for glass tempering machine?
Taking the radiation glass tempering furnace for example, the set heating time (the time glass stays in the furnace) for each millimeter of thickness is usually about 40 to 50 seconds. For instance: the heating time for a 6mm glass pane is approximat
-
2021-04-12How to maintain the lifting drive of the glass tempering furnace ?
In order to ensure a smooth lifting of the tempering furnace body, after each lift of the upper tempering furnace body, spray an appropriate amount of #46 lubricating oil from the top of the glass tempering furnace pillar onto the trapezoidal screw.
-
2021-02-24How to stop the glass tempering furnace when it is in normal production…
If the tempering furnace stops production for only a short time, simply go to the tempering furnace control panel and turn on the temperature “Sleep” button. You may also set the appropriate temperature according to the length of the stop time so tha